Cedesktop.exe Wince 6. 128 MB DDR RAM - 128 MB NAND Flash - Windows CE 5.0 ( as written in the user manual ) It has a USB port (that reads only flash USB.

Contents • • • • • • • • • • • • • • • Make sure your device is compatible First, you will have to make sure that your device is compatible, that is to say, to make sure you can install arbitrary cab files or run arbitrary exe files on it. For some devices, there are unlock procedures () that will allow to escape from the main program and get a Windows CE desktop. Biologia delle piante zanichelli pdf file. Download cab or zip Navit package Download the latest release from and go to the WinCE section. From there get the CAB or ZIP navit package and put it on your device (see below). You may use the latest shipped XML file for you to configure (or for devices with low memory output use the file from ). Installation of Navit SD Card or MicroSD Card • Copy the cab-file onto a SD card.

Insert it in your mobile device. Start the cab-file for installation or (if applicable) use a CAB-Install application. OR • Unpack the zip-file onto a navit folder to save on a SD card.

Insert it in your mobile device. Navigate to the folder navit (probably located in Storage Card. Start navit.exe. Direct Download If you mobile device with WinCE/WinMobile is directly connected to the internet.

Download the cab file and install it. Editing navit.xml For configuration with the navit.xml file it it useful to transfer the file navit.xml to your Desktop-Computer (ActiveSync on Win. Or with on Linux). Edit the XML-file navit.xml using Notepad++ or another editor and store it back on your mobile device. GPS Receiver GPS Receiver communicates with the Operating System OS via COM1, COM2. You have to set the COM-interface with the XML-tag in navit.xml. For example for a bluetooth receiver connected via (virtual) com port com6 working at baudrate 38400, update you navit.xml files for GPS settings ( tag): Note the colon: after COM6.

Without it, you'll probably see lots of 'vehicle_wince:initDevice:Waiting to connect to com' in the log file. Note: you will probably have to comment out, or set to disabled all other entries to keep only this one.

If you're in the Toronto area check out Howard's workshops. If you're in New York, go to Barry's classes. My book can be found here. The method is about improvising harmony as 'movement' as opposed to static chords. Barry harris jazz workshop pdf reader pdf.

If you have an internal GPS or Bluetooth receiver, then you will have to determine the com port of the GPS. There are several ways to do this: • On some devices, for internal GPS receiver, go to Settings > Connections > GPS. (Sometimes this item is hidden, but you can run the program WMGpsShow to unhide it). Tap Hardware and you can see the 'GPS hardware port' and 'Baud rate'. • You can also run the Windows CE utility SirfTech.exe on your device to scan the GPS, it will give you both the com port and baud rate for the GPS receiver. • For a bluetooth-connected GPS, the virtual com port can be configured and / or reviewed in Bluetooth Settings on tab Serial port as value of input box Outbound COM port.

• If the above does not help, for internal GPS receiver, have a look at registry HKLM Drivers BuiltIn GPSserial FriendlyName to determine your GPS-COM-Port. Once you know the GPS hardware COM port and baud rate, let's say port COM7 and baud rate 57600, then you have to set these values in navit.xml using a line similar to: On some device, it is necessary to use uppercase letters for the COM port (eg: 'COM5') to get it work (added by Killerhippy, hope it helps) Using Navigation Next Turn OSD item To use the OSD item on WinCE, the icon must be explicitely sourced. In navit.xml it should something like: See for more information.

Speech Speech output should work out of the box on WinCE. In navit.xml which comes with the WinCE Navit-build you can find: All files are included and no additional installation/configuration (and no espeak.exe) is necessary! Language Language detection may not work on WinCE devices, so you may have to manually configure your language by manually setting it in navit.xml. Here is an example for Austrian German: Download a Map from OpenStreetmap Use.

With your browser on desktop: • Navigate to the region you want, • mark a rectangle for your map (e.g. For Germany) and click select for the chosen rectanglular map. • then click on download and save the file to country.bin (e.g. Germany.bin) on your desktop computer.

• copy the file to on your WinCE/WinMobile device via ActiveSync or SynCE on Linux (or an option that may be faster because of the size of the maps, you can also directly copy the map to the (Micro-)SD card from your PC and re-insert the card in your mobile device later). Create a maps directory for the maps on your SD card and copy the map files to that folder (the examples below assume that the maps will be stored in StorageCard maps, and that the map will be saved as StorageCard maps germany.bin. Note that the separator between directories is on Win-OS the ' ' and Linux, Mac. • This directory will be used in navit.xml so that navit is able to find and use the map(s): • Add and enable the map for the application in navit by changing the lines (at approx line number 370) It seems you need to specify the bin name in newer versions of navit. I also had to add two backslashes before the bin name running 0.2.0, or the log would tell me it couldn't find the map file.